Exell IMR 18350 LiMN 700mAh 10.5AMP Rechargeable Button Top Battery

Out of stock
Exell IMR 18350 LiMN 700mAh 10.5AMP Rechargeable Button Top Battery
  • Fast shipping on all orders
  • Safe shopping guarantee
  • Secure online payments

Exell IMR 18350 LiMN 700mAh 10.5AMP Rechargeable High Drain Consumer Button Top Battery

Exell IMR 18350HP7 3.7V 700mAh Li-MN Battery is an ideal replacement battery for many of todays in demand applications such as E-Cigarettes also known as MODS, Vaporizers or Vape products as well as high intensity LED flashlights and Solar Lamps used in gardens and walk ways.This LiMN battery has three-dimensional tunnels that enable rapid diffusion of Li+ through LiMn2O4 particles, and therefore lithium-ion cells made with this material can have better theoretical drain rate capability. Conventional lithium-ion cells use LiCoO2 or variations of that material. Cells with LiCoO2 cathodes are typically designated with the term "ICR". The LiCoO2 type materials have a layered crystal structure that only enables 2D diffusion within the layers, so the overall Li+ diffusion rate is slower.

Interestingly, LiFePO4, which is commonly used in high rate cells (think A123), has 1D diffusion of Li+ and an overall low diffusion rate. The only way to make LiFePO4 work is to make the particles very small (i.e. "nano") to reduce the distance that Li+ needs to diffuse. "Why not just make LiCoO2 or LiMn2O4 nano size to get even better rate capability?" I hear you ask. The only reason nano LiFePO4 works is that this material has a lower oxidizing potential (which is why the cell voltage is lower) and therefore it does not chemically react with the electrolyte. LiCoO2 and LiMn2O4 actually oxidize the electrolyte slowly with use, so using a nano-particulate cathode with these materials would greatly accelerate aging due to the higher surface area of the cathode, and the cells would have terrible cycle life.

Li-MN batteries have a lower crystalline density and therefore a lower inherent capacity (mAh/ml) than LiCoO2. If you do a direct replacement of LiCoO2 with LiMn2O4, the capacity of the cell will be reduced by ~15%. But here is the interesting thing: simply doing a direct replacement with LiMn2O4 will not significantly increase the rate capability of a cell. In order to get a real increase in rate capability, you need to design a cell with higher electrode surface area and thinner electrodes because Li+ diffusion in the cathode particles is not the only bottleneck to getting current out of the cell. Using thinner electrodes further reduces the capacity of the cell because you will have a higher fraction of "inert" materials like the separator and current collector. This is why IMR cells typically have ~40% lower capacity than their ICR cousins.

Exell IMR 18350HP7 3.7V 700mAh Li-MN Battery Specifications
  • Voltage: 3.7V
  • Amperage: 700mAh
  • Battery Size: 18350
  • Continuous Maximum Discharge Current: 5.25 amps
  • Maximum Pulse Discharge Current: 10.5 amps
  • C Rating Charge Rate: 15 ~ 20C
  • Type: Lithium Manganese (LiMN)
  • Length: 1.38in (35.0m)
  • Width: 0.71in (18.0)
  • Terminal Type: BUTTON TOP
Exell LiMN Battery Warning:
  • Do not overcharge or overdischarge
  • Recharge drained batteries immediately
  • Do not short circuit
  • Do not dispose of in fire
  • Do not expose to extreme heat or water
  • Please be familiar with handling lithium-ion batteries before purchase

Exell IMR 18350HP7 3.7V 700mAh Li-MN Battery Applications: Solar Lighting, Home Security Systems, Digital cameras, Electronic Cigarettes, E-CIG, MODS, Vape, Vaporizer, GPS, Digital calipers, calculators, electronic clocks, medical equipment, measuring instrument, sensors, radio transceiver, and many other electronics.

Exell IMR 18350HP7 3.7V 700mAh Li-MN Battery Safety and Reliability Information:

An additional property of LiMn2O4 is that it cannot be overcharged. When a "true" IMR cell is charged beyond ~4.25 V, no additional capacity will go into the cell. The voltage will simply spike. This is exactly the same case for LiFePO4 cells. Cells that use LiCoO2 and its layered-metal oxide cousins can be overcharged, leading to significant safety issues when these cells are charged above their specified voltages. Cells with LiMn2O4 and LiFePO4 cathodes can be damaged by overcharging (oxidation of the electrolyte leads to increased internal resistance, loss of capacity and shorter cycle life), but overcharging to higher voltage does not make them less safe. This inability to overcharge, combined with the lower total energy density, is why lithium-ion cells with LiMn2O4 and LiFePO4 are generally considered to be "safer".

The last property of LiMn2O4 is that in its pure form it tends to have very poor cycle life. There has been a tremendous amount of research that has gone into improving the stability of LiMn2O4 to improve the cycle life of IMR cells, and this has produced cells with reasonably good long term performance. However, the easiest way to get great cycle life out of LiMn2O4 is to blend it with a separate cathode material that contains nickel. This includes the layered cathode materials Li(Nix,Cox,Mnx)O2 (aka NCM or 333), Li(NixCoyAlz)O2 (aka NCA) and Li(NixCoy)O2 (aka NCO). I won't bore you with the details, but it turns out that the oxides containing nickel acts to change the local chemistry around the LiMn2O4 particles and helps to improve stability.

Note: We ship Li-Ion Batteries in accordance with U.S. Department of Transportations CFR 49. This may mean additional shipping charges in which case you will be contacted within 48 hours. If you have any questions please contact us directly.

Need more than one Exell IMR 18350HP7 Battery? We offer great discounts on quantity orders and FREE SHIPPING offers available.

More Information
UPC 813662026963
Width 0.71"
Length 1.38"
Condition New
Brand ExellBattery
Warranty Life 1 Year Manufacturer Warranty
Chemistry Li-Ion
Output Voltage 3.7
Amperage 700mAh
Rechargeable Yes
Terminal Type Button Top
Capacity mAh
Watts W
Color Yellow
Voltage 3.7V
Write Your Own Review
You're reviewing:Exell IMR 18350 LiMN 700mAh 10.5AMP Rechargeable Button Top Battery
Your Rating
More from ExellBattery